Aluminum Stair Treads

Aluminum Stair Treads contain diamond-hard, aluminum oxide abrasives that are bonded to heat-treated aluminum to form the most rugged outdoor metal stair treads. Ideal for use in the most heavily traveled outdoor public stairways.

Aluminum Stair Nosings

Aluminum Stair Nosings

Aluminum Stair Nosings offer enhanced slip resistance thanks to their grit top surface, superior durability and cover just the front and nose of any stair.

• Square nosing.
• 3/16” thick.
• 2-1/2” deep.
Flexible Metal Stair Treads

Flexible Metal Stair Treads

Flexible Metal Stair Treads offer increased slip resistance due to their carbide grit surface and come in a variety of colors for use on worn, slippery stairs in any environment.

• Square nosing.
• 1/4” thick at nose.
• 6.5", 9" and 11” deep.
Grit Strip Metal Stair Treads

Grit Strip Metal Stair Treads

Grit Strip Metal Stair Treads offer unmatched slip resistance due to their grit surface (especially when wet), unsurpassed durability and an eye-catching design.

• Square nosing.
• 9/32” thick at nose.
• 9" and 11” deep.
Aluminum Stair Treads

Aluminum Stair Treads

Aluminum Stair Treads offer maximum slip resistance due to their grit surface, superior durability and a modern look.

• Square nosing.
• 3/16” thick at nose.
• 7-1/2", 9" and 11” deep.
Grit Surface Floor Plates

Grit Surface Floor Plates

Grit Surface Floor Plates increase traction both indoors and outside with a carbide grit surface, which is ideal for stairways, landings, ramps, catwalks and other flat areas needing a skid-resistant surface.

• Anti-slip metal plates for stairs, landings and ramps.
• 1/4” thick.
• 3.5”, 5.5" and 7" deep.
Cast Aluminum Stair Nosings

Cast Aluminum Stair Nosings

Cast Aluminum Stair Nosings offer the most traction for use on slippery concrete steps for both new construction and existing stairways. Cast Aluminum Nosings boast a non-corrosive, cross-hatch design and a sand-cast surface for ultimate slip-resistance on the nose of any stair.

• Square Angle nosing.
• 1/4” thick.
• 3” and 4" deep.
Cast Iron Stair Nosings

Cast Iron Stair Nosings

Cast Iron Stair Nosings offer the industrial-grade construction and superior traction, especially on wet concrete stairs and can be installed during new construction as well as for renovation projects. Cast Iron Nosings have a non-corrosive, cross-hatch surface design along with a sand-cast finish for superb slip-resistance.

• Square Angle nosing.
• 1/4” thick.
• 3” and 4" deep.