Stair Nosings

Stair Nosings protect against slips and falls and can be a critical component of any stairwell system since nosings take the brunt of all foot traffic and are therefore the best part of the step to increase traction and slip resistance. Stair Nosings are typically 2" - 4" deep into the step can be placed on top of an existing stair or inlaid into a new concrete, wood or metal stair. Nosings can but up against carpet or virtually any other flooring substrate. Also, due to their smaller size, stair nosings can be a less costly option compared to traditional stair treads and other step coverings.

Vinyl Stair Nosing

Vinyl Stair Nosing is vinyl stair risers that match our vinyl stair treads. The length and height of these stair risers can easily be trimmed.

Aluminum Stair Nosings

Aluminum Stair Nosings offer enhanced slip resistance thanks to their grit top surface, superior durability and cover just the front and nose of any stair.

• Square nosing.
• 3/16" thick.
• 2-1/2" deep.

Cast Aluminum Stair Nosings

Cast Aluminum Stair Nosings offer the most traction for use on slippery concrete steps for both new construction and existing stairways. Cast Aluminum Nosings boast a non-corrosive, cross-hatch design and a sand-cast surface for ultimate slip-resistance on the nose of any stair.

• Square Angle nosing.
• 1/4" thick.
• 3", 4" and 6" deep.

Cast Iron Stair Nosings

Cast Iron Stair Nosings offer the industrial-grade construction and superior traction, especially on wet concrete stairs and can be installed during new construction as well as for renovation projects. Cast Iron Nosings have a non-corrosive, cross-hatch surface design along with a sand-cast finish for superb slip-resistance.

• Square Angle nosing.
• 1/4" thick.
• 3", 4" and 6" deep.

Grit Surface Fiberglass Stair Treads

Grit Surface Fiberglass Stair Treads are industrial-grade step coverings made from a fire retardant fiberglass coated with a carbide grit surface for extreme traction indoors and outside.

• Carbide grit surface fiberglass step coverings.
• 1/8" thick.
• 3", 8", 9" and 11.75" deep.

Grit Surface Floor Plates

Grit Surface Floor Plates increase traction both indoors and outside with a carbide grit surface, which is ideal for stairways, landings, ramps, catwalks and other flat areas needing a skid-resistant surface.

• Anti-slip metal plates for stairs, landings and ramps.
• 1/4" thick.
• 3.5", 5.5" and 7" deep.
Leave a message