Metal Stair Treads

Metal Stair Treads encompass industrial-grade, heat-treated aluminum, iron and steel step coverings which are either cast or bonded with long-lasting oxide abrasives to produce the most rugged, indoor/outdoor metal stair treads available today. These metal treads are perfect for heavy-traffic, frequently traversed commercial and public stairways. These metal stair coverings hold up to the harshest environments including, rain, snow, sleet and extreme temperature ranges.

Flexible Metal Stair Treads

Flexible Metal Stair Treads offer increased slip resistance due to their carbide grit surface and come in a variety of colors for use on worn, slippery stairs in any environment.

• Square nosing.
• 1/4" thick at nose.
• 6.5", 9" and 11" deep.

Grit Strip Metal Stair Treads

Grit Strip Metal Stair Treads offer unmatched slip resistance due to their grit surface (especially when wet), unsurpassed durability and an eye-catching design.

• Square nosing.
• 9/32" thick at nose.
• 9" and 11" deep.

Aluminum Stair Treads

Aluminum Stair Treads offer maximum slip resistance due to their grit surface, superior durability and a modern look.

• Square nosing.
• 3/16" thick at nose.
• 7-1/2", 9" and 11" deep.

Cast Aluminum Stair Nosings

Cast Aluminum Stair Nosings offer the most traction for use on slippery concrete steps for both new construction and existing stairways. Cast Aluminum Nosings boast a non-corrosive, cross-hatch design and a sand-cast surface for ultimate slip-resistance on the nose of any stair.

• Square Angle nosing.
• 1/4" thick.
• 3", 4" and 6" deep.

Cast Iron Stair Nosings

Cast Iron Stair Nosings offer the industrial-grade construction and superior traction, especially on wet concrete stairs and can be installed during new construction as well as for renovation projects. Cast Iron Nosings have a non-corrosive, cross-hatch surface design along with a sand-cast finish for superb slip-resistance.

• Square Angle nosing.
• 1/4" thick.
• 3", 4" and 6" deep.

Grit Strip Metal Stair Nosings

Grit Strip Metal Stair Nosings offer unsurpassed skid-resistance thanks to the high-traction grit surface (which is especially slip-resistant when wet), uncompromising durability and an overall modern construction.

• Square nosing.
• 9/32" thick at nose.
• 2", 3" and 4" deep.

Aluminum Stair Nosings

Aluminum Stair Nosings offer enhanced slip resistance thanks to their grit top surface, superior durability and cover just the front and nose of any stair.

• Square nosing.
• 3/16" thick.
• 2-1/2" deep.

Low-Profile Aluminum Stair Nosings

Low-Profile Aluminum Stair Nosings are just 1/8" thick at their highest point, have two high-traction surface materials for improved slip resistance and are constructed with a heavy-duty aluminum base all while creating a skid-resistant surface on the stair's nose.

• Square nosing.
• 1/8" thick.
• 3" deep.

Grit Surface Floor Plates

Grit Surface Floor Plates increase traction both indoors and outside with a carbide grit surface, which is ideal for stairways, landings, ramps, catwalks and other flat areas needing a skid-resistant surface.

• Anti-slip metal plates for stairs, landings and ramps.
• 1/4" thick.
• 3.5", 5.5" and 7" deep.

Aluminum Stair Treads with Anchors

Aluminum Stair Treads with Anchors are design for placement in wet concrete during new construction and offer superior slip resistance thanks to their grit surface, enhanced durability and permanent application.

• Bullnose and straight edge options
• 1/4" thick overall.
• 3" and 4" deep.

Aluminum Stair Treads with Glow-In-The-Dark Message

These Aluminum Stair Treads boast a glow-in-the-dark front grit that encapsulates a direction, message, location or even company logo while continually providing enhanced, heavy-duty slip resistance.

• Square nosing.
• 3/16" thick at nose.
• 7-1/2", 9" and 11" deep.
Leave a message