Stair Nosings protect against slips and falls and can be a critical component of any stairwell system since nosings take the brunt of all foot traffic and are therefore the best part of the step to increase traction and slip resistance. Stair Nosings are typically 2" - 4" deep into the step can be placed on top of an existing stair or inlaid into a new concrete, wood or metal stair. Nosings can but up against carpet or virtually any other flooring substrate. Also, due to their smaller size, stair nosings can be a less costly option compared to traditional stair treads and other step coverings.
Vinyl Stair Nosings are protective molding strips installed on the front edge of stairs to enhance safety and durability while offering a visually distinctive, finished appearance.
• Butt-, Lap- and Carpet- designs • Thickness: 1/4" to 3/8" • Height: 1-5/16" to 2-1/2" • Depth: 2-3/4" to 3-1/2"
Grit Strip Metal Stair Nosings offer unsurpassed skid-resistance thanks to the high-traction grit surface (which is especially slip-resistant when wet), uncompromising durability and an overall modern construction.
• Square nosing. • 9/32" thick at nose. • 2", 3" and 4" deep.
Aluminum Stair Nosings offer enhanced slip resistance thanks to their grit top surface, superior durability and cover just the front and nose of any stair.
Cast Aluminum Stair Nosings offer the most traction for use on slippery concrete steps for both new construction and existing stairways. Cast Aluminum Nosings boast a non-corrosive, cross-hatch design and a sand-cast surface for ultimate slip-resistance on the nose of any stair.
Cast Iron Stair Nosings offer the industrial-grade construction and superior traction, especially on wet concrete stairs and can be installed during new construction as well as for renovation projects. Cast Iron Nosings have a non-corrosive, cross-hatch surface design along with a sand-cast finish for superb slip-resistance.
Industrial-grade, carbide grit Fiberglass Stair Nosings are heavy-duty stair nose coverings manufactured from fire retardant fiberglass which is then covered with a high-traction, carbide grit coating for ultimate anti-slip grip in any environment.
Low-Profile Aluminum Stair Nosings are just 1/8" thick at their highest point, have two high-traction surface materials for improved slip resistance and are constructed with a heavy-duty aluminum base all while creating a skid-resistant surface on the stair's nose.
Grit Surface Floor Plates increase traction both indoors and outside with a carbide grit surface, which is ideal for stairways, landings, ramps, catwalks and other flat areas needing a skid-resistant surface.
• Anti-slip metal plates for stairs, landings and ramps. • 1/4" thick. • 3.5", 5.5" and 7" deep.
We'll match any price or give you 110% of the difference.
We want to earn your business. That is why we are committed to delivering mats at the lowest possible cost to our customers. If you happen to find a lower total cost (inclusive of shipping, fees, tax, etc.) American Stair Treads will give you 110% of the difference.
