Stair Tread Contact Adhesive

Our Stair Tread Contact Adhesive is a non-solvent (water) based alternative for installing rubber and vinyl stair treads as well as cove risers to concrete, wood, terrazzo, metal or marble.

Stair Tread Contact Adhesive is available in Ready-to-use in 1 quart, 1 gallon and 4 gallon containers. (This adhesive requires 24 hours to fully cure before use).

One gallon covers approximately 75 lineal feet of stair treads (simply brush on back of tread and step).

Item No: STADHSCA

Have a question? We're here to help!
Stair Tread Contact Adhesive

    Standard Configuration

    We Also Recommend

    Neoprene Contact Cement

    Neoprene Contact Cement

    Quick-drying, solvent based
    Works on vinyl & rubber
    Ideal on any surface
    1 Gal covers 75 LF
    As low as $24.00
    Epoxy Rubber Tile Adhesive

    Epoxy Rubber Tile Adhesive

    2-part, non-solvent based
    Works on rubber
    Simply mix; stirrer included
    1 Gal set covers 150 LF
    As low as $112.00
    Epoxy Stair Tread Nose Caulk

    Epoxy Stair Tread Nose Caulk

    Designed for adjustable noses
    Always a good preventive step
    Fills voids, supports nose
    2-part mix or dual-cartridge
    1 Quart covers 75 LF
    As low as $4.00
    Rubber Flooring Adhesive

    Rubber Flooring Adhesive

    Best used on concrete & wood
    For use in drier areas
    Latex-based formula
    1 Gal covers 150 LF
    As low as $34.00
    Standard Sizes (Approximate)
    Tap Row For Volume PricingorShow All
    QuantityPrice
    1 $30.00
    2-10 $26.00
    11-25 $22.00
    26+ $20.00
    QuantityPrice
    1 $86.00
    2-10 $82.00
    11-25 $78.00
    26+ $74.00
    QuantityPrice
    1 $296.00
    2-10 $292.00
    11-25 $288.00
    26+ $284.00
    Leave a message